DA 22-12-2615 51mm Volz Servo

DA 22-12-2615 51mm Volz Servo (short design) 12 volt; even though this actuator is rather compact and light it features a relatively high continuous torque output of 80 Ncm (110 oz-in).

View cart

Description

DA 22-12-2615 51mm Volz Servo (short design) 12 volt; even though this actuator is rather compact and light it features a relatively high continuous torque output of 80 Ncm (110 oz-in). It can be used for functions with average continuous loads, where speed is of lesser importance (like ailerons and flaps in smaller UAVs).

DA 22-12-2615 51mm Volz Servo Optional: ISS gear protection system; extended travel angle up to 330°; position feedback device, RS-485 protocol, customized cases.

 

About DA 22 Servos/Actuators

The DA 22 servo/actuator is available in a short and long case version – the longer being more powerful, i.e. offering higher continuous torque capabilities.

The CNC machined sealed cases, made of saltwater resistant aluminum, comply with the IP 67 standard for water/dust resistance and provide EMI/RFI shielding. All types of our DA 22 actuators use all steel gear trains with ISS gear protection system as an option and are fully programmable (motor overload protection, Fail Safe position in case of PWM command signal lost, etc.). Integrated M8 round male connector (optional MIL specified connector or integrated cable with screwed cable gland). The cases offer integrated lug mounts for both horizontal and vertical installation.

 

About Volz Servos

A servo from Volz excels due to the simplicity of its design while simultaneously maximizing positioning force, reliability and durability. Moreover, a variety of electric interfaces makes it possible, for instance, to monitor the operating condition of the servos by reading out the current consumption, the internal temperature and humidity, etc.

Every actuator compromises a DC motor, a gear train and control electronics governed by microprocessors with integrated position feedback. These are electromechanical servo units that precisely position a radial output drive.

Depending on the type of actuator, the maximum travel in the standard configuration varies between 90° and 170°. Versions with larger travel of up to 330° or “Multiturn” versions can be provided on request.

 

About Volz

Founded in 1983, Volz Servos began designing, manufacturing and marketing exclusively electro mechanical actuators/servos worldwide. Volz has developed a product range that meets most customer requirements concerning maximized torque, speed, efficiency, reliability, and durability at minimized volume/weight, component and development costs.  Volz has a reputation for being experts in the market of compact, highly efficient actuators/servos.

OPERATING DATA
Supply Voltage (rated) 12 V DC
Supply Voltage Range 10…16 V DC
Standby Current at rated voltage <0.01A
Rated Current at rated voltage 0.4 A
Peak Current at rated voltage 0.8 A
Rated Torque at rated voltage 80 Ncm (113 ozf-in)
Peak Torque at rated voltage 160 Ncm (226 ozf-in)
No Load Speed at rated voltage 210°/s
Rated Speed at rated torque 120°/s
Default Travel Angle ±45° = 90° total travel
Max. Standard Travel Angle ±85° = 170° total travel
Extended Travel Angle (optional) ±165°=330° total travel
Backlash (mechanical) < 0.5°
Position Error under Temperature < ±1.0°
Operating Temperature -30°C … +70°C (-22°F…+158°F)
Storage Temperature -35°C…+80°C (-31°F…+176°F)

 

COMMAND SIGNAL Valid for all versions with PWM Command Signal
PWM DA 22-_ _-_ _ _ _-_-_-_-X-_ _
Signal Voltage Levels TTL-Level HIGH: min. 2.2V; max 5.0V
Signal Voltage Levels TTL-Level LOW: min 0.0V; max 0.8V
Frame Rate 2.6…2000 ms
Valid Pulse Lengths 1.0…2.0 ms
Pulse Length for Position Left/Center/Right 1.0/1.5/2.0 ms
Resolution < 0.5us

 

RS 485 COMMAND SIGNAL Valid for all versions with RS 485 Command Signal
RS 485 DA 22-_ _-_ _ _ _-_-_-_-R-_ _
Baud-Rate 115200±1.5% bits/s
Protocol (documentation available) 6 Byte (incl. 2 byte CRC)

 

RS 485 PROTOCOL SPECIFICATIONS
RS 485 DA 22-_ _-_ _ _ _-_-_-_-R-_ _
Number of Data Bits 8
Number of Stop Bits 1 or 2
Parity None

 

COMMAND / RESPONSE FRAME
Byte # Description
1 Command / Response-Code
2 Actuator ID
3 Argument 1
4 Argument 2
5 CRC High Byte
6 CRC Low Byte

 

MATERIAL & PROTECTIVE FEATURES
Case Material Saltwater resistant Aluminum Alloy
Splash Water Resistance IP 67 waterproof to 1m depth
Salt Water Resistance Case Material
EMI / RFI Shielding Case Shielding
Motor Brushed DC Motor
Gear Set Material Hardened Steel
Position Sensor Precision Potentiometer
ISS Gear Protection System Optional
Position Feedback Optional
Extended Travel Angle Optional
RS 485 Communication Interface Optional
Shielded Connecting Cable Optional
MIL specified electrical connector Optional

 

DIMENSIONS DA 22-_ _ -26_ _ …
Case Dimensions 41.5 mm x 45.5 mm x 22.0 mm ±0.2 mm (1.634 in x 1.791 in x 0.866 in ±0.008in)
Weight 105g (3.70 oz) ±10%

 

ELECTRICAL CONNECTION OPTIONS DA 22._ _._ _ _ _._._._._.M8
Integrated M8 Electrical Connector
Manufacturer Franz Binder GmbH & Co.
Type Series 768 / 718
No. 09-3391-81-04
Mating No. 79-3382-42-04
79-3384-42-04
PWM Pin Assignment
1 +V DC Supply Voltage
2 Pos FB Position Feedback Signal
3 GND Supply Ground Signal Ground
4 SIG Command Signal
RS 485 Pin Assignment
1 +V DC Supply Voltage
2 RS 485 A Non Inverting RS 485 Input/Output (A)
3 GND Supply Ground Interface Ground
4 RS 485 B Inverting RS 485 Input/Output (B)

 

INTEGRATED MIL-specified electrical Connector DA 22._ _._ _ _ _._._._._.M8
MIL-specified electrical Connector
Manufacturer Glenair Inc.
Type #/Nr. 801-011-07MT6-4PA
Mating #/Nr. 801-007-…801-008-…
PWM Pin Assignment
1 +V DC Supply Voltage
2 Pos FB Position Feedback Signal
3 GND Supply Ground Signal Ground
4 SIG Command Signal
RS 485 Pin Assignment
1 +V DC Supply Voltage
2 RS 485 A Non Inverting RS 485 Input/Output (A)
3 GND Supply Ground Interface Ground
4 RS 485 B Inverting RS 485 Input/Output (B)

 

INTEGRATED Cable Gland with 250mm Cable DA 22._ _._ _ _ _._._._._.CG250
Cable Gland
Cable Type LiYCY
Wire Gauge 3×0.25mm(2) / 4×0.25mm(2) (Pos FB)
PWM Pin Assignment
1 Green
+V DC Supply Voltage
2 Brown
GND Supply Ground Signal Ground
3 White
SIG Command Signal
4 Yellow
Pos FB Position Feedback Signal
RS 485 Pin Assignment
1 Green
+V DC Supply Voltage
2 Brown
GND Supply Ground Interface Ground
3 White
RS 485 A Non Inverting RS 485 Input/Output (A)
4 Yellow
RS 485 B Inverting RS 485 Input/Output (B)