Futaba 14SGH 14-Channel Heli Computer System

Description

Futaba 14SGH 14-Channel Heli Computer System; the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It’s also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces. This is the helicopter version which will default to heli settings when powered up.Includes receiver model # R70008SB.

The 14SGH can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SGH’s 3-axis gyro support — which makes the 14SGH the perfect system for flybarless flight!

The innovations don’t stop there. Turn the 14SGH over, and you’ll see the construction is as rock-solid as any other Futaba system. It’s also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue — an added bonus that pilots will appreciate.

About The 14-Channel:

• Channels: 12 proportional, 2 switched
• Compatible with FASSTest, FASST and S-FHSS protocols
• FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
• Free user-updatable software
• 30-model memory
• 10-character user naming
• 10-character model naming
• Airplane, helicopter and glider programming
• Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
• SensorTouch™ programming
• Compatible with secure digital memory cards for external storage of model setups and software updates (32MB-2GB or HC (High-Capacity) 4GB-32GB)
• Left and right assignable slider switches
• Two assignable rotary knobs
• Six assignable three-position switches
• One assignable momentary two-position switch
• One assignable two-position switch
• Comfortable rubber grips on the sides and back
• Wide top switch spacing
• Adjustable stick tension
• Dual ball bearing gimbals
• 4 vibration warning types
• Home/Exit; User Menu/Servo Monitor buttons
• Audio earphone jack (for telemetry alarms)
• 6V 1800mAh NiMH battery pack
• User stick calibration
• Trainer system
• Servo speed adjust
• 5 programmable mixes
• V-tail, Ailvator, winglet, motor mixing
• Trim mix
• Logic switch (condition switch only)
• Internal programmer for S.Bus servos
• User menu
• Servo monitor (neutral and moving tests)
• 2 count up/countdown timers
• Integral timer
• Model timer
• Quick model select

Helicopter Features:

• 6 swash plate types
• Pitch/throttle curves (5-point)
• Throttle hold
• Swash mix
• Throttle mix
• Pitch to rudder mixing
• Fuel mixture
• Gyro (Flybarless support)
• Governor (700-3500 rpm)
• Hover pitch
• Hover throttle
• High/low pitch
• Swash AFR
• Swash setting (mixing rate, linkage compensation, speed compensation)
• Swash ring (electronic)
• Throttle cut

This is the Futaba R7008SB 2.4GHz FASSTest 8+ Channel High-Voltage Receiver
for the 18MZ Radio System.

FEATURES: Bi-directional communication with a FASSTest Futaba transmitter using the S.Bus2 port Multiple optional telemetry sensors may be connected to the S.Bus2 port and the data displayed on the transmitter Includes both standard PWM output ports and S.Bus output ports External voltage port, 0-70V DC The External Voltage connector needed for this is: FUTM5551 CA-RVIN-700 EX VLT CBL One year limited warranty through Hobby Services beginning at date of purchase.

INCLUDES: Futaba R7008SB 2.4GHz FASSTest Receiver with Instructions

SPECS: Receiving Frequency: 2.4GHz FASSTest system Power Requirement: 3.7 – 7.4V (voltage range 3.5 – 8.4V) Current drain: 75mA External voltage Port: 0 – 70V DC Size: 0.98 x 1.9 x 0.56″ (24.9 x 47.3 x 14.3mm) Weight: 0.38oz (10.9g) Antenna Length: 5-3/4″