Dual LiPo 5600 11.1v Phantom RTR Kit

Description

Dual LiPo 5600 11.1v Phantom RTR Kit from MaxAmps. This kit includes everything you need to fly two packs on your DJI Phantom or Phantom FC40!

Lipo 5600 3S 11.1v Phantom Pair

This upgrade for the DJI Phantom and Phantom FC40 Quadcopter will maximize your power and flight time.

Two LiPo 2800mah – 11.1v packs

 

Features

• 5600mah capacity(two 2800mah packs)
• 3S 11.1 volts
• True 100C rating
• Lifetime warranty
• 5C fast charge capable
• 100% waterproof
• Built today with factory fresh cells
• Built with genuine 16awg Deans Ultra wire
• We add the XT60 connector and JST-XH balancing tap for you
• 108mm x 37mm x 22mm, 188g each

By using these packs in parallel, you will be running a 5600 11.1v setup.  This will more than double your flight time.

Do NOT run these packs in series when using them in the DJI Phantom or you will damage your system.  They are only to be run in parallel which doubles the capacity instead of the voltage.

Note: This pack is built with the stock plugs shown in the picture for easy plug and play.  If you need a different plug or balancing tap, please mention it in the notes section when checking out.

Note: This battery pair is designed to work with the Phantom 1 and Phantom FC40 but can be used for the Phantom 2 series if you are running the MaxAmps unlocked cap system.

 

Hitec X1 AC Plus Single Port Charger

The new X1 AC Plus battery charger goes everywhere you go.  Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action.  The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources.  Designed to charge NiMH, NiCd, LiPo, LiFe, Li-Ion and Lead-based batteries, the X1 AC Plus is the perfect charging solution for your RC hobby.  Drivers and piolts alike will appreciate its price and relish in its dependability.

Charge your batteries safely and efficiently with this simple to use system.  You can charge in AC mode by plugging into a wall outlet or you can charge in DC mode by attaching it to a 12-volt car battery or a 11-18 volt (20A minimum) DC power supply.

• Charge 1-6 LiPo, LiFePO4/A123, Li-ion, 1-15 NiMH/NiCd, 2-20V Lead Acid batteries
• Up to 6 amp charge rate(50W)
• 11-18V DC or 100-240V AC
• 1-year guarantee

 

Included Accessories

1 – Charge Lead matching battery pack in kit

1 – Tamiya Large Male Charge Lead

1 – Battery Balance Board w/ cable (JST-XH type)

1 – AC Power Cord

1 – DC Power Cord

Fire resistant Lipo Sack 9″ X 12″

Use this fire resistant product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsibility for effectiveness of the Lipo Sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the Lipo Sack.

FREE REPLACEMENT GUARANTEE

Avoid damage to the Lipo Sack. Replace if it becomes ripped, worn or is involved in a battery failure.

If your Lipo Sack is involved in a failure resulting in a venting of the battery and fire return it to us with a statement of the circumstances and receive a replacement Lipo Sack free of charge!

 

XT60 Parallel Adapter for Phantom

This adapter will work perfectly when flying two packs at once in the DJI Phantom or Phantom FC40 Quadcopter.  By using this adapter you will double the capacity(flight-time) of your setup, NOT the voltage.

For example, if you have two 2800 11.1V packs, you would now have a 5600 11.1V setup.

Built with 16awg Deans Ultra wire.

Dual Battery Tray Kit for Phantom

Kit includes:

• 2 – Battery trays
• 8 – 10mm Screws(to replace existing screws)
• 4 – 8″ Velcro straps(not pictured)

Specs/features:

• Made of strong durable ABS Plastic
• Easy installation
• Slotted for velcro straps to ensure battery security during flight
• Only 3mm thick to allow for a seamless fit
• Weight = 21g each