MaxAmps_dual_lipo_4500

Dual LiPo 4500 11.1v Phantom RTR Kit

$239.99

This upgrade for the DJI Phantom and Phantom FC40 Quadcopter will greatly improve flight time.

SKU: Dual-LiPo-4500-11.1v-Phantom-RTR-Kit Categories: , Tags: , , , , , , ,

View cart

Description

Dual LiPo 4500 11.1v Phantom RTR Kit from MaxAmps. This upgrade for the DJI Phantom and Phantom FC40 Quadcopter will greatly improve your flight time.

Two LiPo 2250mah – 11.1v packs

 

Features

  • 4500mah capacity(two 2250mah packs)
  • 3S 11.1 volts
  • True 100C rating
  • Lifetime warranty
  • 5C fast charge capable
  • 100% waterproof
  • Built today with factory fresh cells
  • Built with genuine 16awg Deans Ultra wire
  • We add the XT60 connector and JST-XH balancing tap for you
  • 100mm x 35mm x 24mm, 170g

 

By using these packs in parallel, you will be running a 4500 11.1v setup.  This will double your flight time.

 

Hitec X1 AC Plus Single Port Charger

The new X1 AC Plus battery charger goes everywhere you go.  Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action.  The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources.  Designed to charge NiMH, NiCd, LiPo, LiFe, Li-Ion and Lead-based batteries, the X1 AC Plus is the perfect charging solution for your RC hobby.  Drivers and piolts alike will appreciate its price and relish in its dependability.

Charge your batteries safely and efficiently with this simple to use system.  You can charge in AC mode by plugging into a wall outlet or you can charge in DC mode by attaching it to a 12-volt car battery or a 11-18 volt (20A minimum) DC power supply.

  • Charge 1-6 LiPo, LiFePO4/A123, Li-ion, 1-15 NiMH/NiCd, 2-20V Lead Acid batteries
  • Up to 6 amp charge rate(50W)
  • 11-18V DC or 100-240V AC
  • 1-year guarantee

 

Included Accessories:

1 – Charge Lead matching battery pack in kit

1 – Tamiya Large Male Charge Lead

1 – Battery Balance Board w/ cable (JST-XH type)

1 – AC Power Cord

1 – DC Power Cord

Fire resistant Lipo Sack 9″ X 12″

Use this fire resistant product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsibility for effectiveness of the Lipo Sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the Lipo Sack.

FREE REPLACEMENT GUARANTEE

Avoid damage to the Lipo Sack. Replace if it becomes ripped, worn or is involved in a battery failure.

If your Lipo Sack is involved in a failure resulting in a venting of the battery and fire return it to us with a statement of the circumstances and receive a replacement Lipo Sack free of charge!

 

XT60 Parallel Adapter for Phantom

This adapter will work perfectly when flying two packs at once in the DJI Phantom or Phantom FC40 Quadcopter.  By using this adapter you will double the capacity(flight-time) of your setup, NOT the voltage.

For example, if you have two 2250 11.1V packs, you would now have a 4500 11.1V setup.

Built with 16awg Deans Ultra wire.

 

Dual Battery Tray Kit for Phantom

Kit includes:

  • 2 – Battery trays
  • 8 – 10mm Screws(to replace existing screws)
  • 4 – 8″ Velcro straps(not pictured)

Specs/features:

  • Made of strong durable ABS Plastic
  • Easy installation
  • Slotted for velcro straps to ensure battery security during flight
  • Only 3mm thick to allow for a seamless fit
  • Weight = 21g each