HBL980 High Voltage Brushless Servo
$149.99
HBL980 High Voltage Brushless Servo this Titanium Gear, High Speed Digital Tail Servo; ideal as rudder servo on 600/700 helicopters and Compass Atom 6HV/7HV.
- Description
- Specifications
Description
HBL980 High Voltage Brushless Servo designed by MKS Servo. This Titanium Gear, “High Speed” Digital Tail Servo is ideal to use as rudder servo on 600/700 helicopters as well as Compass Atom 6HV/7HV. MKS brushless servos are best in class in build construction and performance.
HBL980 High Voltage Brushless Servo is a digital, aluminum cased, high voltage metal geared servo.
About Brushless Servos
Brushless Servos have a permanent magnet rotor and three sets of drive coils. The drive coils are controlled by a set of electronic high speed switches (Field Effect Transistors) so there is both less inertia and less friction. The lower inertia allows the servo to get off center faster and stop faster, and less friction means less heat and less wear.
Brushed motors have a set of wound coils called an armature and a mechanical rotary switch that uses a series of brushes as pickups called a commutator. The mechanical rotary switch is a mechanical failure point that eventually wears out, and the wound coils have a bit of inertia.
| SPECIFICATIONS | |
| Dead Band | 0.0008ms (default) |
| Control System | +Pulse Width Control |
| Working Frequence | 760 μs / 560hz |
| (RX) Required Pulse | 3.5 ~ 7.2 Volt Peak to Peak Square Wave |
| Operating Voltage | 4.0 ~ 7.2 V DC Volts |
| Operating Temperature Range | -10 to +60° C |
| Operating Speed (6V) | 0.04 sec/60° at no load |
| Operating Speed (8.4V) | 0.030 sec/60° at no load |
| Stall Torque (6V) | 62.49 oz/in (4.5 kg. cm) |
| Stall Torque (8.4V) | 86.10 oz/in (5.6 kg. cm) |
| Motor Type | Brushless Motor |
| Potentiometer Drive | Indirect Drive |
| Driver Type | FET |
| Bearing Type | Dual Ball Bearings |
| Gear Type | Titanium Gears |
| Programmable | No |
| Connector Wire Length | 24.0cm (9.4 in) |
| Dimensions | 40 x 20 x 40 mm (1.57 x 0.79 x 1.50 in) |
| Weight | 70.29 g (2.48 oz) |
